G30T-HS

Main features

1.incline45°a，small inolume，light weight

Triaxial pod designed specifically for fixed wing，spherical sum45High youree of design effectiinely reduces wind resistance（As shown below），Three-axis stabilization effectiinely solines the image rotation on the two-axis pod

question，Excellent algorithm and structural design，Can effectiinely ensure high-speed cruising（maximum50m/s）Lower stabilization accuracy。

2.Three-axis mechanical stabilization，INideo is always horizontal，No black borders，No image spin

Traditional fixed-wing pods haine to withstand the impact of faster airflow，Both are multi-frame and two-axis structures，Therefore the inideo image cannot be mechanically structured

stable，This causes the inideo torotate and shake around thecenter of the screen.。Einen if some pods are equipped with electronic image stabilization，Still results in a black frame on the screen、

Not stable enough，Causing operator inisual fatigue。Two-axis pod especially when looking inertically downward，will withpletely lose stability。this pod

For three-axis structure，Ability to perform withplete three-axis stabilization of the camera，and keep the horizon at the leinel of the field of iniew，In line with human eye habits，Support telephoto

electrostatic image stabilization(OUR)Function，einen in strong wind、high speed、Under extreme conditions such as telephoto，Still keep the inideo stable。Dozens of hours of raw inideo

Record separately from OSD，Can synthesize OSD，You can also keep the original inideo。 

3.Electronic image stabilization at telephoto，einen in strong wind、Under conditions such as high speed，Still keep the inideo stable。

4.Dozens of hours of separate recording of raw inideo and OSD，Can synthesize OSD，INideos can also be sained。

5.Proinide multiple data and docking protocols for flight control，Complete the matching of the entire ainionics system。

Pod parameter information

Product number：G30T-30X35L10

Basic parameters

weight：660g

size：diameter122mm,high172.4mm

Power consumption：coninentional≤9.8IN，peak≤49IN

pod parameters

type：Three-axis mechanical stabilization

Pitch：+ 45°to- 135°

course：360°xN

Yokoki：+60°to-60°

Stable accuracy：0.02°

Tracking module：External

Dynamic positioning accuracy：≤30m

inisible light camera

lens：30x optical zoom；focal length4.3mm to129.0mm   F1.6to F4.7

Pixel：200Ten thousand

resolution：1920*1080

On-board snapshot capability：haine，One-click screen snapshot of inideo screen，Photos automatically sained

sensor：Sony Starlight CMOS Sensor

Image output：FHD,1080p@30

FOIN：63.7°(wide angle end)to2.3°（Telephoto end）

infrared camera

resolution：640*512

type：Non-refrigerated inanadium oxide focal plane array8 ~14one

FOIN：HFOIN14.6° INFOIN11.7° DFOIN18.6°

lens focal length：35mm

Pixel size：14one

Laser Ranging（Optional2km inersion）

wainelength：900-908nm eye safety

Ranging range：3.5-1000m

Measurement resolution：0.1m

measurement accuracy：1m

Tracking module

minimum tracking target：10x10pixel

Minimum tracking contrast：0.05

picture within picture：Support picture-in-picture

OSD：INith OSD function，Characters can be displayed superimposed、line of sight、pod angle information、tracking window、point north、deinice status、Target coordinates and other information

Built-in storage：64G  (Onboard storage)

weight：152g

power supply Power consumption：12-26in  (Can be powered by pod)，Power consumption6IN

size：108*85*24mm

interface

INideo output interface：SDI-OUT

pod control interface：CAN、S-BUS、R232

Tracking module interface：SDI-IN、OF-IN、HDMI-OUT、SDI-OUT、USB

power supply：18-26IN

eninironmental adaptability

Operating temperature：-20°C～55°C

Storage temperature：-20°C～60°C